Pure Evil
22.12.06, 11:05
Crete backup:
1. Start ramldr and connect your phone
2. Wait for the phone to get into flash mode
3. Click on send ramldr, select ldr.bin
4. Wait for "ACK JUMP"
5. Fill "Base addr" - 10000000
6. Fill "Entry addr" - 12000000
7. Click on "Save mem"
8. Wait 1-2 minutes and you'll get a file named "10000000" with size of approx. 32 MB
Creating PDS backupa:
1. Start ramldr and connect phone
2. Wait for the phone to get into flash mode
3. Click on send ramldr, select ldr_pds.bin
4. Wait for "ACK JUMP"
5. Fill "Base addr" - 10018000
6. Fill "Entry addr" - 10028000
7. Click on "Save mem"
8. Wait for a couple of seconds, then click restart and close ramldr
9. You have another file, one named "10018000" (it's your PDS backup) which you will copy to another location, to have a backup because this one (in current folder) will be edited.
Converting PDS:
1. Start un5x_patch.exe (will be used to convert 10018000)
2. Open that file (10018000) and click on "convert" button
3. Exit the program
Now flash your cell!
Use any flash you like for this step...
Let's go on...:
1. Start Ramdlr.exe
2. Wait for it to go in flash mode
3. Click on send ramldr, then select ldr_pds.bin
4. Wait for "ACK JUMP"
5. Click on Erase - you'll get "ACK ERASE"
6. Fill "Base addr" - 10018000
7. Click on "Send binary", select converted file 10018000
8. Wait a bit
9. Click on restart and you're done!
Should anything go wrong, you can always restore your backup:
1. Start ramldr and connect your phone
2. Wait for the phone to get into flash mode
3. Click on send ramldr, select ldr.bin
4. Wait for "ACK JUMP"
5. Click on Erase and wait a coulpe of minutes - you'll get "ACK ERASE"
6. Fill "base addr" - 10000000
7. Click on Send binary and select file 10000000
8. Wait 'till in the last line you see "11FE0000"
9. Click on restart - and that's it!
1. Start ramldr and connect your phone
2. Wait for the phone to get into flash mode
3. Click on send ramldr, select ldr.bin
4. Wait for "ACK JUMP"
5. Fill "Base addr" - 10000000
6. Fill "Entry addr" - 12000000
7. Click on "Save mem"
8. Wait 1-2 minutes and you'll get a file named "10000000" with size of approx. 32 MB
Creating PDS backupa:
1. Start ramldr and connect phone
2. Wait for the phone to get into flash mode
3. Click on send ramldr, select ldr_pds.bin
4. Wait for "ACK JUMP"
5. Fill "Base addr" - 10018000
6. Fill "Entry addr" - 10028000
7. Click on "Save mem"
8. Wait for a couple of seconds, then click restart and close ramldr
9. You have another file, one named "10018000" (it's your PDS backup) which you will copy to another location, to have a backup because this one (in current folder) will be edited.
Converting PDS:
1. Start un5x_patch.exe (will be used to convert 10018000)
2. Open that file (10018000) and click on "convert" button
3. Exit the program
Now flash your cell!
Use any flash you like for this step...
Let's go on...:
1. Start Ramdlr.exe
2. Wait for it to go in flash mode
3. Click on send ramldr, then select ldr_pds.bin
4. Wait for "ACK JUMP"
5. Click on Erase - you'll get "ACK ERASE"
6. Fill "Base addr" - 10018000
7. Click on "Send binary", select converted file 10018000
8. Wait a bit
9. Click on restart and you're done!
Should anything go wrong, you can always restore your backup:
1. Start ramldr and connect your phone
2. Wait for the phone to get into flash mode
3. Click on send ramldr, select ldr.bin
4. Wait for "ACK JUMP"
5. Click on Erase and wait a coulpe of minutes - you'll get "ACK ERASE"
6. Fill "base addr" - 10000000
7. Click on Send binary and select file 10000000
8. Wait 'till in the last line you see "11FE0000"
9. Click on restart - and that's it!